• All seams are electronically welded so water cannot penetrate.
• Specially developed material with soft cotton lining, to protect paintwork.
• Strong elasticated tie-down straps prevent cover lifting in strong winds.
• Supplied with carry bag,
• Heat shields protect lining from hot exhausts.
• May be used with a cable lock.
• Rated as by MCN as 100% by Dale Lomas,
• Ride recommended product.
• Not suitable for trailering – we are able to supply covers specific for trailering please call to discuss on 01938 561 717.

Shampoo: c. 2-3 capfuls in a bucket. Foam up with hose to create thick lather. Use Sheepskin wash mitt, washing carefully by hand after - do not machine wash.

Drying: use OnePass Drying Towel. Machine wash, air dry.

Pre-Wax: apply by pad supplied in straight lines (up and down, and across), buff when hazed. Apply panel by panel.

Wax: Spread as thinly as possible, and buff when the product has hazed - usually 5-8 minutes. Avoid direct sunlight if possible. Do bonnet is 2 or 3 sections, doors in 2 sections. If buffing left too late, reactivate with very thin additional coat.

Sizes are for cost purposes only and whilst we have a vast library of measurements there are still some cars and other vehicles that we do not have adequate information for and therefore we offer a full measuring service which is charged at cost. Please call for further information.